ESC

Hand held field-programmer for adjusting the parameters of your ProModeler DL-series ESC. Using it is easy; just connect it to the throttle lead of your ESC (perhaps using a long servo extension to make things easier) and you're ready to go!

Link2PC is the thingy that lets you connect a ProModeler DL-series ESC to a PC via your computer's USB port. Connnecting it is easy because you just plug it into the computer, then use a servo extender to reach the throttle lead from your ESC, and presto, you're ready to download the most recent data!

Programming this ESC is a matter of using conventional beep codes just like usual (e.g. based on the throttle stick position of your transmitter). However, if you're computer savvy and have access to an old Windows XP computer, then we have software that will let you download data based on time, like at 2 minutes, you can see what the current draw was, the pack voltage, motor RPM, and ESC temperature, as well as the throttle stick % at that instant. The point being you could go back and watch...